Set Up Quick Launch
The Quick Launch module provides easy access to common modules and device commands. Go to Navigation > Quick Launch to open the module. To use the Quick Launch module, you must create a panel in the Quick Launch Editor. For this example, you will create a panel and add device command and report widgets.
Create a Panel
Go to Configuration > Quick Launch Editor > New Panel.
Name the panel and define the number of columns and rows to be displayed. Assign a location if applicable. Use the following for this tutorial:
Name: Test
Number of Colums: 1
Number of Rows: 2
Press OK.
Add Device Command Widget
In the first cell, select Add.
Select Device Command, then press OK.
Enable Multiple (by filter) of type, then select Device.
In Device, select Filter, then select Choose.
Choose the doors that will respond to this command and press OK.
To close Filter - Device, press OK.
In Command, select Choose.
Select Lock. Press OK.
Note: Some commands require the Parameters to be filled in. If this field is required, select Choose, then select a parameter.
To close the Add - Device Command Widget, press OK.
Add Report Widget
In the second cell, select Add.
Select Report, then press OK.
In Report, select Choose.
Select a report to add to the panel. For this example, select Profiles - Enabled located in the Management tree.
Press OK.
To close Add - Report Widget, press OK.
In the toolbar, press Save.
Edit Widgets
To edit a widget's location, select Edit below the cell. Select Location to redefine the cell's row and column location.
To change the panel's name or modify the panel's number of columns and/or rows, select Properties in the toolbar.
Utilize the panel by navigating to the Quick Launch module, located in the Navigation drop-down menu. The panel should appear as configured in the previous steps.
Note: To modify the panel, return to the Quick Launch Editor module.