Skip to main content
Skip table of contents

Add a Panel

To add a panel, see the instructions below:

  1. Open the Configuration menu, hover over Hardware, and select Hardware - Tree.

  2. Right-click the DMP Driver and select New Panel Wizard.

  3. Enter the panel's information in the DMP Panel Wizard window.

    1. The panel Name should be Panel XXXX (where XXXX is the panel number).

    2. Enter the IP address in the Host field.

    3. Enter the Account Number of the panel.

  4. Select Next. Entré will attempt to connect to the panel.

  5. Select Next in each new menu until the final menu appears then select Finish.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.