Skip to main content
Skip table of contents

Assign Key Fobs to Badges

In Entré NOC, you can assign key fobs to badges.

Assign Key Fobs to Badges

  1. Go to Management > Key Fobs.

  2. Select Add.

  3. Select Choose. Enter a first or last name in the search box for a user that currently exists in the system. Select Find.

  4. Double-click on the personnel row that generates from the search.

  5. In Badges, select the badge to assign to the key fob. Press Save and Close. The key fob is now assigned to the credential of the user.

Program Outputs on the Key Fob

  1. Select the number of buttons to be programmed on the key fob.

  2. Select an action for the button to perform. When you do so, additional fields will generate which allow you to choose the areas, outputs, or systems you want to target.

  3. If applicable, program the press time as Short or Long.

  4. To the right of the generated text fields, select Choose to assign the areas, outputs, or systems you want to target.

  5. Choose the area, outputs, or systems you want the button to control. Press OK.

  6. Continue to program the additional buttons using the sections, as applicable. When you are finished, press Save and Close.

Additional Details

You have the following options in the Add - Key Fob Control window:

  • Serial Number: All key fob numbers begin with 05.

  • Key Fob Number: Enter a key fob number between 400-449.

  • Number of buttons: Program 1, 2, or 4 buttons on a key fob.

  • Supervision Time: Choose None, 60, or 240 minutes.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.