Skip to main content
Skip table of contents

Output Point Status

Output points are a Form C (SPDT) relay or switched ground (open collector) built onto a panel or output expander module that can be controlled by schedules, panel programming, or manually. The parent device of an output is always a panel. There are no device types that have an output as the parent device.

Device Status

Outputs have the following device status values.

  • Steady: Sends continuous power to the output.

  • Off: Turns output off. For example, disabling an alarm bell.

  • Pulse: Pulse the output at one second intervals.

  • Momentary: Send power to the output once for one second.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.