Create a Profile Template

Use the Profile Templates module to create templates.

Create a Profile Template

1. Go to Advanced > Profile Templates.

2. Select Add. Select a predefined template. For this example, choose Most restrictive, then press OK.

3. Name the template, then configure template options by selecting Edit Template.

4. In Profile, select Enabled to enable the profile template. Otherwise, the profile remains disabled.

Configure the Profile

Use the General, Module, Device Commands, or Data Types sections. Each section allows specific settings to be enabled or disabled.

1. Go to Device Commands.

2. Select a device, then configure the profile's command abilities by selecting the appropriate options from Allow command to be issued. For this example, the profile is allowed (Yes) to issue a Cancel All Batches command.

   • Note: To configure the default, open the General section, select Miscellaneous, then check the Allow issuing device commands as default checkbox on the left side of the window.

3. If Allow issuing device commands as default is selected, the default for the profile's command abilities will be Yes. If deselected, the default will be No.

4. To configure a filter for the device command, select Filter.

5. To define which data types the profile will be authorized to view and modify, go to Profile and select a data type, then select permissions for the profile. For this example, select Event, then select both View and Modify to enable the profile to view and modify events.

6. Press OK, then press Save and Close.